All new High Lifter APEXX Control Arms are stronger, adjustable, and engineered for the most punishing terrain with 1.75" of additional ground clearance and raked forward 1.5". Push your Polaris General 1000 XP to the limits and tackle obstacles you couldn't before! Optional preinstalled ball joints.
Heavy Duty Strength:
High Lifter's new heavy-duty control, arms add more support than the factory. The upper control arms that come stock on a Polaris General 1000 XP are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. High Lifter arms are constructed out of 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.
Built-in Adjustability:
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8" of adjustability, and camber in and out. Heat-treated and plated adjustable bushing collars allow you to be confident in the strength you're adding to your ride. This kit comes packaged and adjusted to the factory position, and factory bushings and caps should be used for installation.
Increased Ground Clearance:
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends. This unique design allowed us to get an additional 1.75" of ground clearance to avoid impacting those nasty trail obstacles. These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift. We've improved the upper control arm by repositioning the sway bar tab. This will reduce the extreme angles placed on the sway bar links and reduce wear.
Control Arms Features:
- Adjustable heat-treated collars for camber adjustability with a 1" thread
- Raked forward 1.5"
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint brackets to eliminate deformation issues, High Lifter HD Ball Joint Compatible
- Ladder bar compatible with the 1.5" ID clamps
- Extreme duty 1.5" x .120" DOM steel construction
- Up to 1.75" of added ground clearance compared to OEM lower arm
- Utilizes High Lifter's new brake line clamps for securing brake lines to control arms
- Optimized sway bar linkage angles
- Includes upgraded heavy-duty inner and outer tie rods with Heim joints and alignment cones.
- Powder Coated
- Custom Colors Available upon request. (Customer must provide paint code)
