SKU:
H40B-WithHitch-EPG
BRAND:
Kunz
40″ class homeowner grade model with a single cylinder manual start engine and manual blade engagement. Works great as an add-on to the side of a riding mower or zero turn mower for larger yards. Can also be pulled with an ATV.
Finish Cut Mower Features:
- 40″ Class
- 10.5 HP Briggs & Stratton Engine
- Heavy Duty Homeowner Grade
- 4 Tire Design
- Manual Clutch Blade Engagement
Specification | |
| Class Mower | Homeowner |
| Engine Make | OHV Briggs & Stratton |
| Engine Model | Power Built |
| Engine HP | 10.5 |
| Lubrication Method | Splash |
| Electric Start | No |
| Number of Mower Blades | 2-20" |
| Blade Tip Speed (ft/min) | 17;500 |
| Cutting Width | 38" |
| Cutting Height (Infinite Adjust Each Wheel) | 1.0" - 4.0" |
| Blade Engagement Clutch | Manual |
| Clutch Engagement Speed | Manual |
| Deck Metal Thickness | 11 GA |
| Deck Top Plate Thickness | 11 GA |
| Weight | 235 lbs |
| Pneumatic Fixed Rear Tire | 13/500x6; 2 Ply Turf |
| Front Tires on Casters | 9/350x4; Slick (Flat Proof Urethane) |
| # of Anti-Scalp Wheels Under Deck | 3(2 Front; 1 Rear) |
| Hour Meter/Tachometer | No |
| Oil Pressure Shut Off | No |
| Fuel Tank Size | 2.8 Quarts |
| Blade Spindles | 25mm Shaft |
| Bearing # | 6205-2RST |
| Drive Method | 1 B Section "V" Belt |
| Warranty | 1 Year Residential (Engine - 2 Year Residential) |
Â
Lawn and Garden Hitching
Use on riding mowers and zero turn radius mowers
- The Lawn and Garden Hitching bolts directly to the existing hitch on any riding lawn mower or zero turning radius mower.
- Allows for close hitching of the AcrEase and telescopes in or out to adjust for the tow vehicles deck width.
- Provides a maneuverable quick response system with maximum stability at high mowing speeds and on steep banks.
- When pulling one wing mower use the tow vehicle hitch (telescope hitch) (1) and short tongue (2).
- When pulling multiple wing mowers it is necessary to purchase additional hitching. The following pictures are suggested ways to pull multiple wing mowers with a tow vehicle that has a mower deck.
- The long tongue extension (3) is used when two AcrEase are pulled (one on the left and one on the right). By extending the left side AcrEase back; grass will not be blown onto the right side AcrEaseATV Tongue
Use on ATVs; Utility Vehicles; and all other tow vehicles without mowing decks.
- The ATV tongue hitches directly to the tow vehicles existing hitch with a provided clevis pin.
- Quick and easy initial installation.
- The ATV tongue can be quickly interchanged from the offset position to direct behind towing.
- Quick response maneuverablity and stability at high mowing speeds and on steep banks may be reduced slightly.
- When pulling multiple wing mowers the ATV Tongue is not adequate. To pull two wing mowers with an ATV; Utility Vehicle or other tow vehicle without a mower deck use the short tongue (2); long tongue extension (3) and rear hitch (4).
