This is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels; Class-bd for the subwoofer channel; and a conformal coated pc board designed for motorsport and marine applications.
The PM1000X5 1;000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels; run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power; this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal; over-current and short circuits.
1000 Watt Class-bd 5-Channel Amplifier Features:
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 2/4 channel input switch
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specs:
- Number of Channels - 5
- Total Power (Sum of Rated Power) - 1000 Watts
- Rated Power (RMS Continuous Power) - 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm; 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm; N/A + 500 Watts @ 1-Ohm
- Dynamic Power (PVC/PowerCube®) - 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res; 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res; N/A + 863 Watts x 1 @ 1-Ohm 0° Res
- Bridgeable - Yes (front/rear channels)
- Frequency Response - Front/Rear: 20Hz - 20kHz +/-3dB; Sub: 20Hz - 500Hz +/-3dB
- Input Sensitivity - 150 mV - 12 V
- Circuit Topology Class - Class A/B + Class BD (Sub)
- Efficiency (average) - Front/Rear: 66% @ 4-Ohm; Sub Channel: 80% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise) - <1.0%
- Signal Input - Input Switch: Hi/Low level input; Input Switch: 2/4 channel input; Hi/Low Level: 3 RCA Pair; Sub: front/sub input switch
- Signal Output -
- Tone Controls - Sub: 0dB to +18dB @ 45Hz
- Crossover Controls - Front: 50Hz - 250Hz High-Pass @ 12dB/Octave; Rear: 50Hz - 250Hz
- High-Pass @ 12dB/Octave; Sub: 50Hz - 250Hz Low-Pass; Sub: 28Hz infrasonic filter @ 12dB/Octave
- Remote Controls - Optional Punch Level Control (PLC2) Ready
- Visual Indicators - Power/Protect/Thermal LED; Input Clip LED3; Output Clip LED1;2;3 (LED Color Legend: 1BLUE: <0.5% THD; 2VIOLET: 1% THD; 3RED: 10%+ THD)
- Power Wire Gauge - 4 AWG
- Power Input Connector - Block
- Speaker Wire Gauge - 12 AWG
- Speaker Output Connector - Block
- Cooling - Convection
- Heatsink
- Operating Voltage - 9 - 16 VDC
- Recommended Fuse (not included) - 150 A
- Average Current Draw (13.8V Music) - 75 A
- Max. Current Draw (13.8V Sinewave) - 150 A
- Suggested Alternator - 100 A