This is a 300 Watt 2-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.
The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers; component speakers; or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology; the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Punch Marine 300 Watt 2-Channel Amplifier Features:
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specs:
- Number of Channels - 2
- Total Power (Sum of Rated Power) - 300 Watts
- Rated Power (RMS Continuous Power) - 100 Watts x 2 @ 4-Ohm; 150 Watts x 2 @ 2-Ohm; 300 Watts x 1 @ 4-Ohm Bridged
- Dynamic Power (PVC/PowerCube®) - 120 Watts x 2 @ 4-Ohms 0° Res; 203 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable - Yes
- Frequency Response - 20Hz-20kHz
- Input Sensitivity - 150 mV - 12 V
- Circuit Topology Class - Class A/B
- Efficiency (average) - 69% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise) - 4-Ohm: <1.0%; 2-Ohm: <1.0%
- Signal Input - Hi/Low Level: 1 RCA Pair
- Signal Output - Low Level: 1 RCA Pair
- Tone Controls - 0dB to +14dB @ 12.5kHz; 0dB to +18dB @ 45Hz
- Crossover Controls - High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth; Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth; All-Pass: Yes
- Remote Controls - Optional Punch Level Control (PLC2) Ready
- Visual Indicators - Power/Protect/Thermal LED; Input Clip LED3; Output Clip LED1;2;3 (LED Color Legend: 1BLUE: <0.5% THD; 2VIOLET: 1% THD; 3RED: 10%+ THD)
- Power Wire Gauge - 8 AWG to 4 AWG
- Power Input Connector - Captive C-Clamp
- Speaker Wire Gauge - 8 AWG to 18 AWG
- Speaker Output Connector - Captive C-Clamp
- Cooling - Convection
- Heatsink
- Operating Voltage - 9 - 16 VDC
- Recommended Fuse (not included) - 50 A
- Average Current Draw (13.8V Music) - 23 A
- Max. Current Draw (13.8V Sinewave) - 45 A
- Suggested Alternator - 75 A